Known Effects Eco paint

ECOLOUR™ Wet Area Satin is a zero VOC, acrylic paint with exceptional coverage that produces a premium quality satin finish. Contains antimould & antibacterial.

$ 35.00$ 168.00 Included gst

Clear

Recommended Uses
Suitable for interior walls and ceilings in wet areas.

Colours
Any colour from any colour chart.

Coverage
16sqm/L on smooth surfaces (8-10sqm/L on rough, unpainted surfaces).

Application Advice
Ensure surfaces to be painted are clean and free of dust, dirt, mould, contaminants and any flaking or blistering paint. Fill any cracks or holes with a suitable filler. Surfaces previously painted with oil based enamel need to be cleaned with an etch cleaner, such as Gloss Off, to ensure adhesion. Use Ecolour Primer Undercoat for unpainted surfaces, then apply 2 top coats. An additional coat may be required if using or painting over deeper colours.

Stir well with a broad flat stirrer to a relatively even consistency. Do not apply in temperatures below 10ºC or above 35ºC. When applying in hot and windy conditions or when painting very absorbent surfaces, dampen the surface with water before painting or thin the paint with 100ml of water per litre.

ECOLOUR™ paints can be applied by roller, brush or spray gun. Apply 1 generous coat making sure the surface is covered thoroughly and evenly. Touch dry in 30 minutes. Allow 2 hours before applying top coat or longer in humid, cold or damp conditions.

Care and Maintenance
This product will provide a scrubbable surface that can be wiped clean with a damp cloth. Surface scratches can be repaired by cutting back and re-coating.

Further Information

Product Data Sheet (PDS) – Wet Area Satin

Material Data Safety Sheet (MSDS) – Wet Area Satin

Ready to ship in 1-3 business day from Australia


 

Shipping Policy

Ecolour delivers Australia wide to your home or work free of charge for all orders placed online (minimum order value $50). Typical delivery time frames are as follows:

Melbourne: next business day
Brisbane/Gold Coast: 2 business days
Sydney/Canberra: 2 business days
South Australia/Tasmania: 2-3 business days
Western Australia/Northern Territory: 5 business days
You can also call in to an Ecolour shop to pick up supplies, so come and see us at:

Ecolour Factory & Store
6 Grevillea Street
Byron Bay NSW 2481

Ecolour Store
13 Marine Parade
Abbotsford VIC 3067


 

Refund Policy

Product Guarantee – Ecolour provides a 10 year guarantee against any flaking or peeling on this paint*. If an Ecolour product fails to perform as specified, Ecolour will provide, at no cost, sufficient paint to recoat the affected area.

Colour Match Guarantee – We will match any paint colour from any colour chart to as close as possible. If you are not satisfied with the colour we will replace prior to application.

(*providing surfaces have been prepared and paint has been applied as per instructions on label. Failure of product caused by any breakdown of a coating previously applied is not covered by this guarantee)

Reviews

There are no reviews yet.

Be the first to review “ECOLOUR-Wet Area Satin”

Your email address will not be published. Required fields are marked *

Vendor Information

  • Store Name: Ecolour
  • Vendor: Ecolour
  • Address: BYRON BAY New South Wales 2481
  • No ratings found yet!